Solid Fluid System Solutions  
Home Software About Hardware Firmware
Document Icon 1July09
Document Icon 22June09
Document Icon 19June09
Document Icon 18June09 (correction)
Document Icon 18June09
Current Document Icon 12June09
Document Icon 26May09
Document Icon 16May09
Document Icon 15May09
Document Icon 10May09
Document Icon 18April09

Sheet1 General Arrangement (Version 005)

Drawing Sheet

Drawing Sheet


The main focus for this effort was to get the cab outline, smokebox and chimney drawn in. No complicated thinking required for this, but I hope it makes the drawing look more presentable.

A key finding is that the boiler barrel can be 4 1/2" outside diameter. In copper this is a standard size piece of tube. It allows some space for cork lagging or an airgap, with a thin outer cladding in brass or steel.

For the time being the wheels are not drawn as being quartered. On the front elevation, the two sides of the engine are actually mirrored. Until things are more complete, this is satisfactory.

Copyright © Solid Fluid 2007-2022
Last modified: SolFlu  Tue, 28 Jul 2009 01:49:51 GMT